This article provides information about locks and the compatibility with digital Key.
* BLUENET: All BLUEnet locks are digital key compatible.
* RFnet: The RFnet Cylinder ( aka GEO) IS NOT digital key compatible.
Wall Reader:
Non-digital key support
| Technical Name | Name in Larry | FW Number | FW Version |
| Clay RF Module | RF Module | 0099 | 01.01 |
| CU Clay | Controller firmware | 0114 | 01.52 |
| WRD 4000 Nordic KS | Reader | 0129 | 01.01 |
Defective (needs to be replaced)
| Technical Name | Name in Larry | FW Number | FW Version |
| CU Clay | Controller firmware | 0114 | 01.01 |
| WR Clay | Reader | 0115 | 04.01 |
| Clay RF Module | RF Module | 0099 | 01.01 |
digital key enabled
The following information is displayed on Larry when we hover over the lock. As we can see, we have to check the control firmware version and compare it with the following table. For this example, the version 01.73 is above 01.71 so it meets the requirements for digital key compatible wall reader lock.
| Technical Name | Name in Larry | FW Number | FW Version |
| CU Clay | Controller firmware | 0114 | 01.71 |
| WRD 4000 BGM KS | Reader | 0151 | 01.00 |
| Clay RF Module | RF Module | 0099 | 01.01 |
| BGM | - | 0136 | 0201 |
Escutcheon:
Non-digital key support
| Technical Name | Name in Larry | FW Number | FW Version |
| Lock Clay Control | Controller firmware | 0095 | 01.14 |
| Lock Reader | Reader | 0008 | 04.10 |
| Clay RF Module | RF Module | 0099 | 01.01 |
Digital key enabled
The following information is displayed on larry2 when we hover over the lock. As we can see, we have to check the reader version and compare it with the following table. For this example, the version 01.07 is above 01.03 so it meets the requirements for digital key compatible escutcheon lock.
| Technical Name | Name in Larry | FW Number | FW Version |
| Lock Clay Control | Controller firmware | 0095 | 01.14 |
| BLE Lock Reader | Reader | 0140 | 01.03 |
| Clay RF Module | RF Module | 0140 | 01.01 |
| BGM | 0136 | 02.01 |
The coloured part on each table shows what you will have to check in comparison with larry in order to determine if the wall reader or escutcheon lock is compatible. The lock has to be equal or more of the version displayed on the table.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article